Brands
LG Appliance Repair in Ottawa
LG appliances are electronic from the ground up: inverter direct-drive washers, sensor-driven dryers, refrigerators with linear or inverter compressors, and control boards everywhere. That makes them efficient and quiet, and it means LG repair is about reading error codes and testing with a meter rather than listening for a worn belt.
LG washers and dryers are the brand's most frequent calls for us, with the washer error codes pointing at the drain, the door lock, the motor sensor or the inlet valves. LG refrigerators are known for compressor concerns on certain generations, which is sealed-system work we are honest about, but far more often the fault is a fan, a defrost sensor or an ice maker that we can fix in your kitchen.
Which LG appliances we repair
Common LG faults we see
Washers
- Drain or spin error: a drain pump blocked by debris or failed, or a door lock not confirming
- Motor error on a direct-drive washer: the hall sensor or rotor position sensor rather than the motor itself
- Fill or water errors: inlet valves or a pressure sensor
- Loud spin: drum bearings on older front-loaders
Dryers
- Airflow code and long dry times: a restricted vent or a blocked lint path, which we check before any part
- No heat: heating element or thermistor
- Door switch or control faults that stop the start
Fridges and freezers
- Warm fridge, working freezer: evaporator fan or a defrost sensor fault icing the coil
- Ice maker stopped: module, fill tube or inlet valve
- Compressor running hot with no cooling: a sealed-system fault we diagnose and are upfront about
Dishwashers
- Not draining: drain pump
- Not filling: inlet valve or a leak sensor tripped by a small leak underneath
- Control board faults behind a dead panel
Ranges and ovens
- Oven not heating: bake element or sensor
- Glass top element out: the element or its relay board
- Error codes pointing at the oven control
Parts and warranty
LG stocks the parts that fail most on its direct-drive laundry and its fridges in Canada: drain pumps, hall sensors, door locks, inlet valves, heating elements, thermistors, fans, defrost sensors and ice maker kits. Main control boards are model specific and are ordered to the serial number. An LG still covered by its warranty, and in particular an LG fridge with a compressor concern, should be reported to LG first; those repairs run through their own network.
LG questions
My LG washer shows a code. Can you tell what is wrong from it?
The code narrows it to a system: drain, door lock, motor sensing, fill or the controller. We start there and test the parts behind the code before replacing anything, because the same code can be a blocked pump or a failed one.
Is the LG linear compressor problem something you can fix?
A failed compressor is sealed-system work and we are straight about that: we diagnose it, tell you what we found, and point you to the right route rather than charge for a repair we cannot complete. Most LG fridge calls are not the compressor, though. Fans, defrost sensors and ice makers are the usual culprits, and those we fix in place.
Do LG parts take long to get?
Common parts such as drain pumps, sensors, inlet valves, elements and ice maker modules are generally stocked in Canada. A specific main board may need ordering, and we tell you the timing before we leave.
LG error code guides
Other brands we repair
Need an appliance technician today?
Tell us what's going on and you'll get a straight answer, or just call.
