Brands
Maytag Appliance Repair in Ottawa
Maytag built its reputation on laundry, and laundry is still most of what we see from the brand. Since Whirlpool bought the company, newer Maytag washers, dryers, fridges and dishwashers share platforms and parts with Whirlpool, while the older Maytag-built machines are their own design with their own quirks. Knowing which one is in front of us is the first step of every Maytag call.
The Bravos and Centennial top-loaders, the Maxima and newer front-loaders, and the Maytag dryers that pair with them are the machines that keep Ottawa laundry rooms running, and they fail in predictable ways. Maytag kitchen appliances are less common here but follow the same Whirlpool-platform logic: a short list of parts covers most faults.
Which Maytag appliances we repair
Common Maytag faults we see
Washers
- Bravos or Centennial top-loader will not spin: a failed lid lock or shift actuator, or a drive hub stripped under the agitator
- Top-loader shaking the room on spin: worn suspension rods
- Front-loader not draining or showing a drain code: a blocked or failed drain pump
- Older Maytag-built washers leaking at the front: a worn tub seal or a cracked outer tub
Dryers
- Runs but will not heat: heating element or a thermal fuse that opened because the vent is restricted
- Loud rumble or squeal: drum rollers, idler pulley or a worn belt
- Shuts off early or runs forever: a moisture sensor coated in softener residue, or a failed thermistor
Fridges and freezers
- French-door fridge warming while the freezer works: evaporator fan or a defrost fault
- Ice maker stopped: the module, the inlet valve or a frozen fill tube
- Door gaskets that no longer seal on bottom-freezer models
Dishwashers
- Will not drain or leaves a puddle: drain pump or a blocked filter and sump
- Cycle will not start: door latch switch or control board
- Poor washing: spray arms, wash motor or a failed heating element
Ranges and ovens
- Bake element burnt out, often visible as a blister or break
- Oven temperature off by a wide margin: the sensor or the control
- Surface element dead or stuck on: the infinite switch
Parts and warranty
Because newer Maytag machines share Whirlpool platforms, their drive, drain and control parts are as easy to source as Whirlpool's, and parts for the older Maytag-built washers and dryers are still available for the common failures. A Maytag inside its warranty period should go to Maytag first, since warranty work is routed through the manufacturer's network.
Maytag questions
Is a newer Maytag the same as a Whirlpool inside?
Often, yes. Many Maytag models built since the Whirlpool purchase share the platform and the parts, which makes them quick to diagnose and easy to source parts for. Older Maytag-built machines are different inside, and we carry the knowledge for both.
My Maytag top-loader fills but will not spin or agitate. Is that expensive?
Usually not. On the Bravos and Centennial platform the common culprits are the lid lock and the shift actuator, both modest parts. We confirm with a test rather than guessing, and quote before we start.
Do you repair the older, heavy Maytag dryers?
Yes. The older Maytag dryers are simple and worth keeping: elements, fuses, belts, rollers and switches are all available and all repairable. We tell you if the drum or cabinet has reached the end instead.
Maytag error code guides
Other brands we repair
Need an appliance technician today?
Tell us what's going on and you'll get a straight answer, or just call.
