Service
Dishwasher Installation in Ottawa
New built-in dishwashers installed, connected to water, drain and power, levelled, tested and explained, with the old one disconnected and moved out of the way.
A dishwasher that was not levelled leaks at the door, and one whose drain hose was not looped properly can pull dirty water back from the sink. Smart Appliance Service installs the dishwashers it repairs, so the hookup is done the way a technician would want to find it later.
We disconnect the old unit and move it out of the way, set the new one in the opening, connect the water supply, the drain and power, level it and secure it under the counter. Then we run a test cycle, check every connection for leaks and walk you through the controls. If the new dishwasher is still in its box, we unpack it, keep the fittings and manuals together and take care of the packaging.
A dishwasher installation takes a little longer than a washer because of the drain loop and the fit under the counter. Book a visit in the evening or on a Sunday if that suits you better; same-day visits are often possible when you call early.
Serving Ottawa, Almonte, Arnprior and surrounding area.
What to have ready before we arrive
Check that the new dishwasher fits the opening, including its height under the counter and the depth with the hoses behind it. The water shut-off and the drain connection under the sink should be reachable, so clear the cabinet under the sink before the visit.
If the new dishwasher needs an outlet or a circuit the kitchen does not have, that is an electrician's job. Tell us the model when you book and we will let you know before the visit.
Replacing an old dishwasher
Most replacements use the same water, drain and power connections as the old unit. If we find a connection that is not up to the job, such as a corroded shut-off valve or a cracked drain hose, we tell you on the spot, quote the fix and let you decide before we go further.
Where we work
Dishwasher Installation across Ottawa and the surrounding area.
Brands we repair
Dishwasher Installation: common questions
We disconnect and move the old unit, set the new one in place, connect the water supply, drain and power, level it and secure it under the counter. Then we run a test cycle, check for leaks and show you the controls.
We disconnect the old dishwasher and move it out of the way so the new one can go in. If you need it taken away, ask when you book.
Most built-in dishwashers share a standard opening, but check the height under your counter and the depth with the hoses behind it. Send us the model number when you book and we will flag anything unusual.
We tell you on the spot, quote the fix and let you decide before we go further. A corroded valve or a cracked hose is cheaper to replace now than after it leaks.
Tell us when you book. A new location needs a water supply, a drain and power, and new wiring or a new circuit is an electrician's job, so we will say what has to be in place first.
Am I in your service area?
Enter your postal code or city and we'll check the drive time from our shop.
Need an appliance technician today?
Tell us what's going on and you'll get a straight answer, or just call.
